Efaflex High Speed Door

EFAFLEX High Speed Turbo Doors are the unique result of creative and innovative German engineering worldwide. The EFAFLEX design engineers have succeeded again in creating a revolutionary door system based on the visions of its users. The result is a high speed door for internal use consisting of single-walled laths which will stay fully-transparent for years. With this, further customer demands for superior speed, strong wind resistance, amazing tightness and excellent reliability were fully met. A huge step in high speed door technology ... Differentiating Features: Interior door for particularly wind-swept openings or as (additional) measure in the exit area Door opens vertically Wear-free door leaf Electronically controlled high speed drive unit (up to 3m/sec) Automatic control unit (can be combined with all types of activation methods) Door line light barrier TLG or Safety contact strip as per ZH 1/494 Full range to accommodate coolrooms, freezers, high use loading docks and warehouses, carparks, and openings requiring security. Standard building sizes up to W=8000mm x H=7800mm
Model SST with Anti Crash System (ACS) REVOLUTIONARY: COMPLETELY NEW SPIRAL DOOR GENERATION Permanently increasing energy costs require a moderate and economical handling of the valuable raw materials. The use of high speed doors basically previously led to saving energy, the heat insulation of the doors used however often was neglected. Therefore as the first and only producer in the world, EFAFLEX will as of immediately offer double walled insulation laths in thermally separated and insulated models for exterior high speed doors ¨C now in serial production. Especially in the times between uses of a high speed door, this measure ensures that it will again extensively reduce the unwelcome loss of heat. According to DIN EN 13241-1, for the first time a steadily built-in door has extreme high heat insulation. According to the manufacturer, U values of around 0.8 W (m²K) are reached for the entire surface of a steadily built-in high speed door. Now in series and thus the first in the world with thermally separated insulation laths. Especially in view of again drastically reducing unprofitable fallout times with high speed doors, for example for maintenance and / or repairs, the engineers at EFAFLEX have had a true stroke of genius together with the introduction of an active crash system (ACS) for solid (!) door blades. If desired, the new SST generation with the model ¡°ACS-DS¡± can be provided with a double sided moving device for the lower door blade area. For this the door blade laths in the area up to ca. 1,000 mm nominal height which are most in danger of a crash are fixed on frame joint chains which are attached to each other and can be removed. If there is a collision between the forklift and the door blade, the laths can normally be pressed out of the tracks undamaged, whereas an inductive sensor registers the "crash", reduces the door cycle to "repair speed" and within the following lifting movement fully automatically puts the parts which have become loose from each other back together again. According to the manufacturer, for the first time you can speak about a "crash without serious consequences" in connection with a fixed door blade because normally there can be no expensive damages or unwelcome fallout times. Furthermore spiral doors with active crash systems are serially being equipped with a direct synchronous drive.
SST-ISO-K High Speed Spiral-Door – Perfect insulation With the development of fast acting insulation doors EFAFLEX is going into a complete new direction. Two door technologies have been combined into a single, innovative system solution: The SST-ISO-K is based on the multiply patented rapid spiral door. Equipped with a highly insulated door blade made of thermally separated slats, a K-factor of at least 0.5 W/m²K is achieved. The caulkings employed prevent from unwanted and uneconomic air and temperature changes. The result is constant climatic conditions.
STT - High Speed Turbo-Door - The quantum leap The High speed Turbo-door is the only worldwide internal High speed door with a door-blade made of single-walled transparent plastic-laths , that will remain completely transparent in the long run. If requested, the door-blade can be delivered PVC-free, making it ideally suited for use in the car industry (e.g. varnishing-plants), in chemical and pharmaceutical companies, as well as in every respect of food-processing. The High Speed Turbo-Door STT features low leakage characteristics at over, respectively sub-pressure conditions and withstands wind-pressures of up to 120km/h while remaining fully functional.
STR High Speed Turbo Roll-up Door – The fastest worldwide Having an average opening speed of more than 3.6 m/sec (11.8 ft/sec), the STR Turbo Roll-up Door is currently the world’s fastest door. Equipped with a permanently flexible door panel in conjunction with an unique, patented spiral winder, it basicly operates free of friction – low noise guaranteed! Unique: In case of damage it is not necessary to replace the whole curtain since the door’s modular construction allows for exchanging individual segments. Thus, the EFAFLEX STR is faster up and running than any other rapid roll-up door. This feature saves time and money!